----------------------------------------------
Release notes for Repute 1.0 Service Release 6
----------------------------------------------
Release date: 14/10/2003
This file records the changes made to Repute 1.0 from Service Release 5
©2002-3 Geocentrix Ltd. All rights reserved.
"Geocentrix" is a registered trademark and "Repute" a trademark of Geocentrix Ltd.
Release:
--------
Repute 1.0 SR 6 (Build 1.0.6.19).
Issues fixed in this release
----------------------------
856. On opening an RPX file, Repute doesn't check whether the project was created in a later version of the program
855. Repute incorrectly sets a pile's YZ rake equal to its XZ rake when importing a 2-dimensional PGN file
854. Project is still marked as "Modified" after saving via File > Save command (but not after saving via File > Save As command)
852. Error message when entering invalid hyperbolic constants includes text '' and '' instead of limiting values
851. XML schema on the Geocentrix website (as used by the PGroupN XML output file) is out of date
850. PGroupN prints pile group stiffnesses/flexibilities with spurious accuracy
849. RPX file should indicate the specific version of Repute that was used to create it
848. PGroupN assumes pile's X,Y-coordinates are at ground level, not at pile head
847. PGroupN does not indicate whether it has been built for standard or large analyses
846. Centroid of pile group incorrectly calculated when determining if problem is 3-dimensional
845. Group stiffnesses and flexibilities are not displayed in the detailed pile loads report
844. Repute fails to set Y-coordinate of load when reading 2-dimensional PGroupN file
843. PGroupN uses wrong value of Poisson's ratio when calculating soil flexibility matrix
840. Named template 'Sum' does not exist in the stylesheet
Known issues
------------
834 - Time taken to read projects containing large number of piles is very long
758 - Very small numbers are omitted when HTML report format selected (workaround: change the Report Format to XML, via Tools > Program Options > General)
747 - Hyperbolic factors trigger error message when outside typical range (not just outside possible range)
732 - Cannot use delete key to edit numbers on Piles page
712 - Edit box will not accept a decimal point when overwriting text containg a decimal point
710 - PGroupN input/output text files are not generated
709 - Error 1931 during installation
706 - No warning is given that additional parameters are required when switching from linear to non-linear analysis
705 - Units for angles do not appear in drop-down boxes
703 - Scales of X and Y axes of pile layout graph are different
690 - X and Y boxes won't accept a negative start to a new number
689 - Delete key does not work on Project page
687 - PGroupN is taking a long time to run
Program files in this release:
------------------------------
File marked * have changed or are new in this release
ENGINEERING.DLL (Build 3.0.3.16)
*GEOCENTRIX.DLL (Build 3.0.5.19)
GEOCENTRIXREGISTRY.DLL (Build 3.0.4.16)
GEOCENTRIXUI.DLL (Build 3.0.3.16)
GXWIDGETS.DLL (Build 3.0.1.34)
MATERIALS.DLL (Build 3.0.3.16)
*PGROUPN.DLL (Build 1.0.5.19)
*PGROUPN.EXE (Build 1.6.0.19)
*PGROUPNEX.EXE (Build 1.6.0.19)
PLATFORM.DLL (Build 3.0.3.16)
PROJECT.DLL (Build 3.0.3.16)
*README.TXT (dated 14/10/03)
*REPUTE1.EXE (Build 1.0.6.19)
REPUTE1.EXE.MANIFEST (dated 03/12/02)
REPUTE1.LIC (dated 22/04/03)
*REPUTE.DLL (Build 1.0.6.19)
SOILS.DLL (Build 3.0.3.16)
WATERTABLES.DLL (Build 3.0.3.16)
BCBIE50.BPL
BORLNDMM.DLL (version 5.0.12.34)
CC3250MT.DLL (version 5.0.1.80)
CW3230.DLL (version 4.2.0.0)
DXSBC5.BPL (version 4.2.0.0)
GRAPHS32.OCX (version 6.0.0.0)
GSPROP32.DLL (version 6.0.0.0)
GSW32.EXE (version 6.0.0.0)
GSWAG32.DLL (version 6.0.0.0)
GSWDLL32.DLL (version 6.0.0.0)
LFBMP13N.DLL (version 13.0.0.15)
LFCLP13N.DLL (version 13.0.0.15)
LFCMP13N.DLL (version 13.0.0.15)
LFEPS13N.DLL (version 13.0.0.15)
LFFAX13N.DLL (version 13.0.0.15)
LFFPX13N.DLL (version 13.0.0.15)
LFGIF13N.DLL (version 13.0.0.15)
LFJ2K13N.DLL (version 13.0.0.15)
LFKODAK.DLL (version 1.1.0.2)
LFPCD13N.DLL (version 13.0.0.15)
LFPCX13N.DLL (version 13.0.0.15)
LFPNG13N.DLL (version 13.0.0.15)
LFPNM13N.DLL (version 13.0.0.15)
LFPSD13N.DLL (version 13.0.0.15)
LFTGA13N.DLL (version 13.0.0.15)
LFTIF13N.DLL (version 13.0.0.15)
LFXBM13N.DLL (version 13.0.0.15)
LFXPM13N.DLL (version 13.0.0.15)
LTCLR13N.DLL
LTDIS13N.DLL (version 13.0.0.15)
LTEFX13N.DLL (version 13.0.0.15)
LTFIL13N.DLL (version 13.0.0.15)
LTKRN13N.DLL (version 13.0.0.12)
LVKRN13N.DLL (version 13.0.0.12)
PCDLIB32.DLL (version 3.0.0.0)
VCL50.BPL (version 5.0.6.18)
VCLX50.BPL (version 5.0.6.18)
X257PR51.BPL (version 2.5.7.0)
GENERATED\
(empty)
HELP\
*REPUTE.CHM (dated 14/10/2003)
MANUALS\
CHANGES.TXT (dated 03/12/02)
REPUTE 1.0 REFERENCE MANUAL.PDF (dated 15/10/2002)
REPUTE 1.0 USER MANUAL.PDF (dated 03/12/2002)
PROJECTS\
EXAMPLES\
2D-LINEAR.PGN (dated 27/04/2002)
2D-NON-LINEAR.PGN (dated 27/04/2002)
3D-LINEAR.PGN (dated 27/04/2002)
3D-NON-LINEAR.PGN (dated 27/04/2002)
2D-LINEAR.PGN (dated 27/04/2002)
PGROUPN\
SAMPLE1.PGN (dated 09/09/2002)
SAMPLE2.PGN (dated 26/07/2002)
TUTORIAL 1\
STEP1.RPX
STEP2.RPX
STEP3.RPX
STEP4.RPX
STEP6.RPX (all dated 15/10/2002)
TUTORIAL 2\
STEP1.RPX
STEP2.RPX
STEP3.RPX
STEP4.RPX
STEP6.RPX
STEP8.RPX (all dated 15/10/2002)
TUTORIAL 3\
STEP1.RPX
STEP2.RPX
STEP3.RPX
STEP4.RPX
TUTORIAL1.RPX (all dated 15/10/2002)
RELEASE NOTES\
REPUTE091.TXT (dated 12/09/2002)
REPUTE092.TXT (dated 02/10/2002)
REPUTE093.TXT (dated 17/10/2002)
REPUTE094.TXT (dated 19/10/2002)
REPUTE095.TXT (dated 15/11/2002)
REPUTE100.TXT (dated 03/12/2002)
REPUTE101.TXT (dated 06/01/2003)
REPUTE102.TXT (dated 21/03/2003)
REPUTE103.TXT (dated 22/04/2003)
REPUTE104.TXT (dated 01/06/2003)
REPUTE105.TXT (dated 26/08/2003)
*REPUTE106.TXT (dated 14/10/2003)
REPORTS\
REPUTE.CSS (dated 11/10/2002)
REPUTE-COMMON.XML (dated 24/09/2002)
REPUTE-COMMON.XSLT (dated 17/04/2003)
REPUTE-LOGO.GIF (dated 27/08/2002)
REPUTE-SIGN-CONVENTION.GIF (dated 10/10/2002)
DETAILED\
*PILE GROUP FLEXIBILITIES.XSLT (dated 17/09/2003)
*PILE GROUP STIFFNESSES.XSLT (dated 17/09/2003)
PILE LOADS.XSLT (dated 22/04/2003)
PILE STRESSES.XSLT (dated 22/04/2003)
SUMMARY\
ALL-INPUT.XSLT (dated 20/11/2002)
COMMON-INPUT.XSLT (dated 17/04/2003)
*KEY RESULTS.XSLT (dated 17/09/2003)
LAYER-INPUT.XSLT (dated 20/11/2002)
LOAD-INPUT.XSLT (dated 20/11/2002)
OPTION-INPUT.XSLT (dated 02/06/2003)
PILE-INPUT.XSLT (dated 12/03/2003)
PROJECT-INPUT.XSLT (dated 11/10/2002)
--------------------
End of release notes
--------------------